Yamaha CS-700 Operation Manual page 92

Property Type
bt.bt-enable BOOLEAN
bt.bt-name TEXT
bt.bt-pin TEXT
bt.bt-pair-timeout NUMBER
bt.enable-nfc BOOLEAN
ble.ble-advertise NUMBER
net.dhcp BOOLEAN
net.ip TEXT
net.subnet TEXT
net.gateway TEXT
net.dns1 TEXT
net.dns2 TEXT
net.vlan INDEXED_
OPTION
net.vlan-id NUMBER
net.ntp1 TEXT
net.ntp2 TEXT
net.ntp3 TEXT
net.ntp4 TEXT
Values
0 : disable
1 : enable
Name of device.
Default value is the product
name concatenated with the
system's BT MAC address
pin : 4-digit string
0 : No timeout
1..120 : Pairing timeout in
seconds
0 : Disable NFC and NFC LED
1 : Enable NFC and NFC LED
0 : Off
1 : On
0 : Disable DHCP
1 : Enable DHCP
IP address
IP address
IP address.
IP address.
IP address.
0 : Manually specify VLAN ID
1 : Disable VLAN
2 : Automatically detect VLAN ID
1..4094 : VLAN ID
IP address or URL or DNS name.
IP address or URL or DNS name.
IP address or URL or DNS name.
IP address or URL or DNS name.
Default Value Description
1 Enable or disable Bluetooth basic-rate.
"Yamaha CS- The Bluetooth basic-rate device name advertised over the air.
700 " + BT MAC
address
0000 The Bluetooth basic-rate pin for pairing. Pins are 4 digits.
60 Bluetooth basic-rate pairing timeout in seconds. After this time,
the pairing mode will stop. A value of 0 indicates no timeout.
1 Enable/disable NFC and the NFC logo LED on the main unit.
0 Set the BLE advertise status.
1 Enables or disables DHCP. If DHCP is disabled, the Static IP
Address, Subnet Mask, and Default Gateway must be specified.
IP Address assigned to the device.
Subnet Mask to determine the subnet to which the device belongs.
The Default Gateway is the device's default router on the IP
network.
Address of the primary Domain Name System (DNS) server.
Address of the secondary Domain Name System (DNS) server.
2 Specifies VLAN behavior and support for the device. 'Automatic'
(2) should be used in environments that provide a Voice VLAN with
automatic detection, in which case the device will determine the
VLAN identifier and register in that network. If the environment
uses Voice VLAN but the Voice VLAN ID cannot be detected,
choose 'Enabled' (0) and specify the ID in the VLAN ID field,
net.vlan-id. 'Disabled' (1) switches off VLAN capabilities.
3 The manually specified LAN ID, from 1..4094. If the VLAN mode is
automatic, this is the detected VLAN ID if VLAN is active.
0.pool.ntp.org Configure first NTP (Network Time Protocol) server address.
1.pool.ntp.org Configure second NTP (Network Time Protocol) server address.
2.pool.ntp.org Configure third NTP (Network Time Protocol) server address.
Configure fourth NTP (Network Time Protocol) server address.
92