Yamaha CS-700 Operation Manual page 61

controlled through the Enable Power Saving Mode checkbox. When the power
savings setting is enabled, the user can select the time (in minutes) after which
the system will go into power savings mode. This feature is set by factory
default with a 20 minute power savings time.
The CS-700 will wake up when activity is detected, either on the Aux in, the
USB connection, or a button is pressed. Please allow about 10 seconds for the
system to wake up.
When the SIP interface is configured on the CS-700SP or CS-700DS version,
due to the requirements of the network and SIP interface, the unit will not go
into sleep mode.
Audio
The Audio settings area under the Settings menu allows changing settings in
the digital signal processor (DSP) and allows impacting the gain on the
auxiliary input (TZ audio).
61