Yamaha CS-700 Operation Manual page 95

Property Type
voip.dtmf-method TEXT
voip.dtmf-rtp- TEXT
payload-type
voip.media- BOOLEAN
onhold-method
voip.use-srtp INDEXED_
OPTION
voip.rtp-port NUMBER
voip.set-qos BOOLEAN
voip.udp-tcp- BOOLEAN
selection
voip.local-port NUMBER
Values
0 : RTP -- RFC2833
1 : SIP INFO
2 : In-band
96..127
0 : M line only -- RFC3264
1 : M and C line -- RFC2543
0 : Disabled -- Do not use SRTP;
always use RTP
1 : Optional -- Use the optional
disposition for SRTP in SDP; if the
remote end supports SRTP then
use SRTP; otherwise use RTP
2 : Mandatory -- Force use of
SRTP; if the remote end does not
support SRTP the call does not
connect
1024..65535 : Port number
0 : Disable QoS
1 : Enable QoS
0 : UDP
1 : TCP
1024..65535 : Port number
Default Value Description
0 DTMF signaling method.
96 Specify the dynamic RTP payload type for DTMF transport using
RTP.
0 The Media on Hold method setting allows switching the Media on
Hold behavior between the different RFC definitions. 'M line only
(RFC3264)' (0) implements the functionality according to RFC3264.
In the INVITE message SDP body, the attribute 'a=sendonly' is set
to a designated media stream to put media on-hold. 'M and C line
(RFC2543)' (1) implements the functionality according to RFC2543.
In the INVITE message SDP body, the connection line ip is set to
'0.0.0.0' (e.g. 'c= IN IP4 0.0.0.0'), and the attribute 'a=inactive' is
added.
0 Controls Secure Real-time Transport Protocol (SRTP) usage.
4000 Base port number for VoIP RTP. RTP is originated and received on
even port numbers, and the associated RTCP uses the next higher
odd port number.
0 Option to enable QoS (Quality of Service) tagging for SIP and
media. For layer 3, at the Internet layer, the DiffServ
(Differentiated Services) precedence level is Class 3. The
Differentiated Services Code Point (DSCP) in the IP header is set to
24 (0x18). For layer 2, IEEE 802.1p tagging is supported.
0 Transport that will be used for SIP messages.
5060 Specifies the local port for SIP transport.
95