Related Manuals for ASI EZFILL 0394 Series
Summary of Contents for ASI EZFILL 0394 Series
- Page 1 Model 0394-(n)* EZFILL™ FOAM SOAP DISPENSER AUTOMATIC DECK MOUNTED FOAM SOAP DISPENSER FOR STANDALONE USE INSTALLATION AND MAINTENANCE GUIDE 1602020958 Rev C 10 July 2016...
-
Page 2: Table Of Contents
SPARE PARTS LIST MAINTENANCE WARRANTY 13-14 EZ FILL™ FOAM REMOTE CONTROL Unit Install Date Unit Location in Facility Unit S/N (From Label) Supplied By Original PO No. ASI Order No. 1602020958 Rev C 10 July 2016 1602020958 Rev C 10 July 2016... -
Page 3: Pre-Installation Information
PACK CONTENTS EZFILL™ FOAM SOAP DISPENSER 0394-(n) PRE-INSTALLATION INFORMATION Identify the items and confirm that parts are included. CHECK CONTENTS Automatic Foam SD Body and vanity Escutcheon Flange Separate all parts from the packaging and check each part with the PACK CONTENTS w/O-Ring and Setscrew mounting hardware with power section. -
Page 4: Technical Data
INSTALLATION TECHNICAL DATA INSTALLING THE EZFILL™ FOAM DISPENSING SYSTEM SOAP DISPENSER Anti-Rotation Pin Model 0390-ARK provides 177 in-lbf (20 Nm) AC Adapter resistance to rotation of dispenser Optional: Plug Configuration Drill a 1” Dia [Ø25] hole through the if mounting material can support 12V Adapter per Option stress of applied force. - Page 5 INSTALLATION FILLING THE SOAP BOTTLE AND PRIMING THE FOAM SOAP DISPENSER STEP 1 - FILLING THE SOAP BOTTLE Attach the bottle support and soap pump to the desired location by securing the support with the supplied Remove the soap bottle from the screws.
- Page 6 BATTERY REPLACEMENT INFORMATION TROUBLESHOOTING Battery models only PROBLEM INDICATOR CAUSE SOLUTION To replace the batteries: Refill the soap tank. Soap has run low or completely out. Refer to page 8 1. Carefully open the battery box, use Philips drive #2 to remove cover screws (Fig.
-
Page 7: Spare Parts List
EZFILL™ Remote for Foam Dispensers ................0393-R performed by a contractor, service company, or the consumer. ASI will not be responsible for labor costs associated with the removal, replacement, repair by MAINTENANCE others, reinstallation, renovation or return of its products. -
Page 8: Ezfill™ Foam Remote Control
Model 0393-R OPERATION If desired, use the remote control to adjust the foam soap dispenser settings. Hold the remote control straight in front of the sensor in a distance of about 4-6” (10-15cm). Attention: Holding the soap dispenser remote control out of the recommended range (too close or too far) may interfere with it’... - Page 9 1602020958 Rev C 10 July 2016...
Need help?
Do you have a question about the EZFILL 0394 Series and is the answer not in the manual?
Questions and answers