Device Setup/Installation; Q8: How Do I Login To My Router - D-Link COVR-3902 Faqs

Device Setup/Installation

Q8: How do I login to my router?

Verify that your computer is connected to the router either via an Ethernet cable or wireless connection,
then follow the steps below:
Step 1: Open your web browser and enter the IP address of the router into the address bar (not in
google). The default IP is 192.168.0.1, or using the link: http://dlinkrouter.local.
Step 2: You should be taken to a D-Link login page. By default, the username is admin and no password
is required.
Note: Administering a Router over Wi-Fi:
Setting up a router for the first time is best done over a wired connection so that your connection isn't
dropped if the security or wireless settings are changed the process. However, it can be done over wireless
too.
When connecting to a router via Wi-Fi, keep the computer close to the router - in the same room if
necessary - to avoid connection drops due to interference or weak wireless signals.
20