Port Forwarding/Virtual Server Setting; Q29: How Do I Enable Dmz On My Router - D-Link COVR-3902 Faqs

Port Forwarding/Virtual Server Setting

Q29: How do I enable DMZ on my router?

DMZ should only be used if you have a computer/device that cannot run Internet applications properly
from behind the router.
Note: By enabling the DMZ (Demilitarized Zone) feature, you are allowing the router to forward all
incoming traffic from the internet to the device specified, virtually disabling the routers "firewall
protection". This may expose the device to a variety of security risks, so only use this option as a last
resort.
Please launch your browser and enter http://dlinkrouter.local or http://192.168.0.1 into the address bar.
Then login and follow the steps below:
Step 1: Click Features -> Firewall
58