Table of Contents
Advertisement
Location and Function of Parts
BKP-9330 (optional)
A BKP-9330 board can be mounted in the extension
slot of the CCU-900/900P.
For information on installation, contact a Sony service
representative.
1 SERIAL OUTPUT connectors
SS-A
SS-B
SS-C
SERIAL OUTPUT
1 SERIAL OUTPUT (SS-A, SS-B, SS-C)
connectors (BNC-type)
Outputs a triple-speed signal from the BVP-9500WS/
9500WSP Super Motion Camera via the A, B, and C
connectors as an SDI signal.
For the super-slow output format, it is enabled to set
the output format for an MAV-555 with a BKMA-
520SS installed or for the SLMS of the EVS.
The output format is changed using switches on the
VPR board.
The rightmost connector is a supplementary connector.
14
Advertisement
Table of Contents
