Temperature Guide - Morphy Richards Saturn Steam Manual

RN305000 MUK Rev1.qxp_IB 17/10/2017 12:10 Page 6

Temperature guide

Heat setting markings on the temperature dial of all Morphy Richards irons match those of the International
Textile Care Labelling Code
Symbol
Temperature level
settings
Steam level setting
(see step 5 of
'Using the iron'
on page 8)
Fabric
Ironing
Steaming
Without steam
Remove all packaging and any protective cover from the soleplate (18), if any. Unwind and straighten the
power cord (6).
We recommend for first time ironing that you iron over an old towel.
Stand the iron on its heel
on a heat resistant stand at the same height as your ironing board or below it. Always ensure the iron is on
a firm surface when ironing.
WARNING: Do not use the product on a surface which could be damaged by heat or steam such as
a worktop or a polished wood surface.
If in doubt, contact Morphy Richards.
Unwind and straighten the power cord (6).
Textiles and clothes carry ironing instructions. If not, follow the temperature guide above, but test the
temperature by ironing the hem of the garment or other discreet area first.
It is advised to begin with 'cool' fabrics (see above) and work up to higher settings. An iron heats up
quicker than it cools down so you'll save time.
If you turn the temperature level down from a hot setting to a cooler setting, wait until the temperature
setting indicator (19)
continue ironing.
6
(120°C Max) Cool
•
Do not iron
No steam
(see 'Dry ironing'
on page 9)
Nylon, Acetates,
synthetic fabrics
Iron on wrong side,
if moisture
required, use
damp cloth
(not Acetate)
(14) and locate it on the iron rest plate of your ironing board (if large enough) or
stops flashing (indicating the correct temperature has been reached) before you
(160°C Max) Warm (210°C Max) Hot
•• •••
Low Medium / High
Wool, Polyester Cotton, Linen
mixtures Rayon, Rayon
mixtures
Fabrics requiring
this setting usually
require steam
pressing.
MAX setting
High