Temperature Guide; Electrical Requirements - Morphy Richards Comfigrip Advanced 40741 User Manual

RN40715MCZ Rev1:9225 47507 MEE pump - Jon
INSTRUCTIONS FOR USE

Temperature guide

Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of the International Textile Care
Labelling Code.
Symbol
Do not iron
Control knob
at all
positions
Fabric
Ironing
With water in tank
Without water in tank

ELECTRICAL REQUIREMENTS

Check that the voltage on the rating plate of your appliance
corresponds with your house electricity supply which must
be A.C. (Alternating current).
WARNING: This appliance must be earthed.
UK only
If the socket outlets in your home are not suitable for the
plug supplied with this appliance the plug should be
removed and the appropriate one fitted.
WARNING : The plug removed from the mains lead, if
severed, must be destroyed as a plug with a bared
flexible cord is hazardous if engaged into a live
socket outlet.
Where used, should the fuse in the 13 amp plug require
changing, a 13 amp BS1362 fuse must be fitted.
27/2/09
(120°C Max) Cool (160°C Max) Warm
Nylon, Acetates Wool, Polyester
mixtures e.g.
e.g. Acrilan
Courtelle, Orlon Polyester/Cotton
Triacetates, e.g.
Tricel/Polyester
Iron on wrong side
if moisture required
use damp cloth
(Not Acetate)
Dry and spray
Dry ironing
10:10 Page 5
(210°C Max) Hot
Cotton, Linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen
Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.
Steam/spray/shot of steam
Jet clean
g
5