Features - Morphy Richards Saturn Steam Manual

RN305000 MUK Rev1.qxp_IB 17/10/2017 12:10 Page 9

Features

Crease light
To enable clearer vision in difficult to see areas,
press the crease light button
crease light (15), press again to switch off.
Dry ironing
To use your iron as a dry iron only, follow steps 2,
3, and 4 of 'Using the iron' on page 7. Do not
press the Auto Steam button
steam pump. You do not need to put water in the
water tank (17).
Vertical steam
Vertical steam is useful for removing creases from
hanging clothes, curtains, upholstery, etc. Hold
the iron between 1cm and 2cm away from the
item and press the steam trigger (11).
Hold the iron vertically and turn on the Auto
Steam function for a constant flow of steam.
Simply allow the steam to pass lightly over the
item of clothing in question to help the creases
soften away. To generate a powerful shot of steam
for stubborn creases, press the steam trigger. You
can also use vertical steaming to clean and
refresh the upholstery around your home.
WARNING: Do not use the vertical steam
feature on clothes that are being worn.
Auto shut-off
If the iron is not moved or any buttons on the
(5) to switch on the controls
horizontally, or 8 minutes if stood upright on its
heel, the product will automatically turn off for
safety and to save energy. When this happens,
the auto shut-off indicator
once.
(3) to operate the
To restart, either move the iron or press any
buttons on the controls
temperature to rise again.
NOTE: The appliance is not turned off completely
in auto shut-off mode. To switch the product off,
press and hold the on-off / temperature decrease
button
(10)
mains outlet.
11
(7) are unused for 1 minute if sat
(24) will flash and beep
(7) and wait for the
(1) until all indicators in the digital display
extinguish, then unplug the product from the
9