Steam Iron Overview; Temperature Guide - Morphy Richards TURBOSTEAM Instructions Manual

RN303140MEE Rev1.qxp_Morphy Richards 19/07/2021 15:31 Page 14
g

Steam iron overview

(1) Variable steam switch
(2) Water spray button
(3) Steam boost trigger
(4) Temperature control
(5) Temperature indicator light / Auto shut-off indicator
(in display on electronic models)
(6) Filling hole with cap
(7) Self clean button
(8) Spray nozzle
(9) Soleplate
(10) Iron heel
(11) Water tank
(12) Cable clip
(13) Filling beaker

Temperature guide

Heat setting markings on the temperature control of all Morphy Richards irons match those of the International Textile Care Labelling Code.
The Turbosteam Pro Intellitemp model is equipped with IntelliTemp technology, which means it is safe to use on all ironable fabrics without
adjusting the temperature setting. Do not use on fabrics that have the 'Do Not Iron' symbol. For stubborn creases, a max setting is available.
Symbol
Temperature Control Do not iron
dial positions
Temperature Control Do not iron
dial positions
Steam level setting
(see step 3 of 'Using
the iron')
Fabric
Ironing
With water in tank
Without water in tank
14
(120°C Max) Cool (160°C Max) Warm
• ••
No steam Low
(see 'Dry ironing')
Nylon, Acetates, Wool, Polyester
synthetic fabrics mixtures
Iron on wrong side, if
moisture required, use
damp cloth
(not Acetate)
(210°C Max) Hot MAX setting
•••
Medium High
Cotton, Linen Rayon, Linen
Rayon mixtures
Fabrics requiring
this setting usually
require steam pressing.
Steam/shot of steam
Dry and spray
Dry ironing