13. Click on I Agree.
14. Uncheck the box for "Automatically start
the WinPcap driver at boot time" and
then click Install.
15. Click Finish and wait for the driver
installation to complete.
Customer Support
[ViZion DR+ 1417V2 Wireless Panel Installation Manual]
16. Once completed you should verify that
Venu installed.
Note: if it shows "Venu failed", instead of
"Venu Installed", the download did
not fully transfer or got corrupted
during download. Check to make
sure Windows Firewall is disabled
and AV is excluding the C:\opal
folder. Then rerun the driver
download and install again.
17. Click Initialize Devices and exit the
Device Manager window by clicking the
red X in the top corner.
18. The Devices status will change from
Shutdown
completed.
1.800.366.5343 –
HCITsupport@konicaminolta.com
[Ultra 4.2.9.0]
to
Initialized
when
20