Advertisement
DELTA i-system
Pushbutton wave shutter UP 211
DELTA profil
Pushbutton wave shutter UP 211
DELTA style
Pushbutton wave shutter UP 211
I
D1
D2
Diagram D
D1
Shutter control insert sys I
D2
Pushbutton wave shutter I
D3
Pushbutton wave shutter II
D4
Shutter control insert sys II
1. Pushbutton wave shutter II: Switch to the special
function (D3).
Action: Press the pushbutton rocker II in the CENTRE for
at least 10 seconds.
Display: The LED of the pushbutton begins to flash
slowly (approx. once per second) after 10 sec-
onds (toggling to the special function).
2. Pushbutton wave shutter I: Switch to the special
function (D2).
Action: Press the pushbutton rocker I in the CENTRE for
at least 10 seconds.
Display: The LED of the pushbutton begins to flash
slowly (approx. once per second) after 10 sec-
onds (toggling to the special function).
3. Pushbutton wave shutter I: Transmit a linking
telegram (D2).
Action: Brief operation (up to 0.4 sec.) of the pushbut-
ton rocker I at the TOP, CENTRE or BOTTOM.
Display: The LED of pushbutton wave shutter I flashes
rapidly (3 times per second) for approx. 3 sec-
onds if the connection has been established
successfully. The LED is then extinguished and
the pushbutton exits the special function. The
LED of the pushbutton wave shutter II also
flashes and is extinguished. The pushbutton
then exits the special function.
Note: There is only a limited period available for the
connection as the pushbuttons wave shutter exit the
special function after 2 minutes.
Siemens AG
Automation and Drives Group
Electrical Installation Technology
P.O. Box 10 09 53, D-93009 Regensburg
II
D4
D3
Pushbutton wave shutter UP 211, 7 pages
© Siemens AG 2008
Subject to change without prior notice
Technical Product Information
The connection of pushbutton wave shutter I with shut-
ter control insert II is complete.
When pushbutton wave shutter I (D2) is pressed, the
shutter control insert sys II (D4) is also operated via radio
control.
If the connection has failed (e.g. if the distance is too
great), the two pushbuttons wave shutter exit the special
function after max. 2 minutes, without confirming the
success of the connection by flashing rapidly.
This procedure must be repeated if pushbutton wave
shutter I is to be connected with other shutter control
inserts sys.
An unlimited number of shutter control inserts sys can be
operated via remote control by the pushbutton wave
shutter (Diagram E).
Diagram E
GAMMa wave
March 2008
5WG3 211-2HB_1
5WG3 211-2AB_1
5WG3 211-2GB_1
Technical Manual
Update: http://www.siemens.de/gamma
2.20.2.2/5
Advertisement
