For Windows 98Se - Aztech WL230USB User Manual

All manuals and user guides at all-guides.com
User Manual
•
- You have a weak connection to a wireless network.

For Windows 98SE

To install the device in Windows 98SE:
Warning... Warning... Warning... Warning...
Do not connect the device until the Utility has been completely installed.
1. Insert the Resource CD to the CD-ROM. This opens the WL230USB Wireless B+G
Utility Setup. If the Utility did not open automatically, select Start > Run. Enter
d:\setup.exe, where d is the CD-ROM drive.
2. Click Next.
3. Click Next.
4. Click Next. The Setup Status displays the installation progress.
5. Click Finish.
6. Connect WL230USB to an available USB port.
7. Click OK when the Insert Disc dialog box opens and then insert your Windows
98SE CD in the CD-ROM.
8. A new icon appears in the System tray -
WL230USB Wireless B+G Utility.
9. Click Site Survey.
10. Select an ESSID and then click Join. The Privacy Configuration dialog box opens
when a network key is required from the selected ESSID. Enter the Network key,
confirm the Network key, and then click OK.
The System tray icon changes to either of the following:
Page 14 of 37
. Double-click this icon to open