For Windows Me - Aztech WL230USB User Manual

All manuals and user guides at all-guides.com
•
- You have a good connection to a wireless network.
•
- You have a weak connection to a wireless network.

For Windows Me

To install the device in Windows Me:
Warning... Warning... Warning... Warning...
Do not connect the device until the Utility has been completely installed.
1. Insert the Resource CD to the CD-ROM. This opens the WL230USB Wireless B+G
Utility Setup. If the Utility did not open automatically, select Start > Run. Enter
d:\setup.exe, where d is the CD-ROM drive.
2. Click Next.
3. Click Next.
4. Click Next. The Setup Status displays the installation progress.
5. Click Finish.
6. Connect WL230USB to an available USB port.
7. A new icon appears in the System tray -
WL230USB Wireless B+G Utility.
8. Click Site Survey.
9. Select an ESSID and then click Join. The Privacy Configuration dialog box opens
when a network key is required from the selected ESSID. Enter the Network key,
confirm the Network key, and then click OK.
The System tray icon changes to either of the following:
•
- You have a good connection to a wireless network.
. Double-click this icon to open
User Manual
Page 13 of 37