For Windows Xp - Aztech WL230USB User Manual

All manuals and user guides at all-guides.com

For Windows XP

To install the driver software in Windows XP:
Warning... Warning... Warning... Warning...
Do not connect the device until the Utility is not completely installed.
1. Insert the Resource CD to the CD-ROM. This opens the WL230USB Wireless B+G
Utility Setup. If the Utility did not open automatically, select Start > Run. Enter
d:\setup.exe, where d is the CD-ROM drive.
2. Click Next.
3. Click Next.
4. Click Next. The Setup Status displays the installation progress.
5. Click Finish.
6. Connect WL230USB to an available USB port. This opens the Found New Hardware
Wizard.
7. Select No, not this time and then click Next.
8. Select Install the software automatically (Recommended) and then click Next.
9. Click Continue Anyway when the Hardware Installation dialog box appears.
10. Click Finish.
11. A new icon appears in the System tray -
WL230USB Wireless B+G Utility.
12. Click Site Survey.
13. Select an ESSID and then click Join. The Privacy Configuration dialog box opens
when a network key is required from the selected ESSID. Enter the Network key,
confirm the Network key, and then click OK. The System tray icon changes to
either of the following:
. Double-click this icon to open
User Manual
Page 11 of 37