For Windows 2000 - Aztech WL230USB User Manual

All manuals and user guides at all-guides.com
User Manual
•
- You have a good connection to a wireless network.
•
- You have a weak connection to a wireless network.

For Windows 2000

To install the driver software in Windows 2000:
Warning... Warning... Warning... Warning...
Do not connect the device until the Utility is not completely installed.
1. Insert the Resource CD to the CD-ROM. This opens the WL230USB Wireless B+G
Utility Setup. If the Utility did not open automatically, select Start > Run. Enter
d:\setup.exe, where d is the CD-ROM drive.
2. Click Next.
3. Click Next.
4. Click Next. The Setup Status displays the installation progress.
5. Click Finish.
6. Connect WL230USB to an available USB port.
7. Click Yes when the Digital Signature Not Found dialog box opens.
8. A new icon appears in the System tray -
WL230USB Wireless B+G Utility.
9. Click Site Survey.
10. Select an ESSID and then click Join. The Privacy Configuration dialog box opens
when a network key is required from the selected ESSID. Enter the Network key,
confirm the Network key, and then click OK.
The System tray icon changes to either of the following:
Page 12 of 37
. Double-click this icon to open