Wan Config - ATCOM AT-640P Quick Start Manual

All manuals and user guides at all-guides.com
AT-640P AT-640P AT-640P Quick AT-640P Quick Quick Quick Start Start Start Start Guide
2 2 2 2 、 、 、 、 Configure
Configure AT-640P to to to to make AT-640P
Configure AT-640P Configure AT-640P
A A A A 、 、 、 、 WAN
WAN WAN Config Config

WAN Config

Config
Network� � � � WAN
Network Network WAN WAN
Network WAN Config
Enter
AT-640P supports three different IP types: Static IP, Dynamic obtain IP (DHCP)
and PPPoE. You can use either of these IP types to connect the internet.
Use Use Use Use Static Static Static Static IP: IP: IP: IP:
----Select "Static";
----Enter the AT-640P's IP address in the "IP address" field.
----Set the "Net mask", default 255.255.255.0
----Enter the AT-640P's upper gateway IP address (for example: Router) in the
"Gateway" field
----Key in the DNS information in the "Primary DNS" and "Alter DNS" fields.
Use Use Use DHCP: Use DHCP: DHCP: DHCP:
----Select DHCP
If you have a DHCP server in your network, AT-640P will automatically obtain
the network information from your DHCP server.
Use Use PPPoE: PPPoE:
Use Use PPPoE: PPPoE:
----Select PPPoE
----Type your PPPoE dialup information in the PPPoE setting fields: PPPoE server
(option), Username and password.
Then the AT-640P will connect to the internet through PPPoE, and automatically
obtain the IP address, Net mask, Gateway, Primary DNS and Alter DNS
information.
ATCOM TECHNOLOGY CO., LIMITED
Guide Guide Guide
make VoIP calls
make make VoIP VoIP calls VoIP calls calls
Config Config
Config
to set the WAN setting: