Volkswagen Golf 1999 Service Manual page 3002

Crash sensors
4. Carpet
Crash sensor for driver side/passenger side
curtain protection, removing and installing
Note:
Removal and installation is described for left side of
n
vehicle. same instructions apply for removal and
installation for right-hand side.
Observe notes regarding coding in radio operators
n
manual before disconnecting battery.
After connecting battery, vehicle options (radio, clock,
n
electric window regulator) must be checked according
to repair manual and/or user manual.
Removing
- Switch ignition off.
- Disconnect battery Ground (GND) strap
Repair Manual, Electrical Equipment, Repair Group 27,
disconnecting and connecting battery
.
- Remove driver /passenger seat
removing and installing
Caution!
Observe safety precautions for working on airbags
69-4, Safety precautions when working on airbags
- Remove floor carpet - 4 - and insulation
mat in sensor area.
Caution!
Electrostatic charges may result in
involuntary deployment of airbag.
Therefore, mechanic must be
electrostatically discharged before
disconnecting ignition- and Ground
(GND) wires. This is done e.g. by
briefly grasping chassis or door
striker.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
72-1, Front seats,
.
.
Página 2 de 7
13/2/2005