Volkswagen Golf 1999 Service Manual page 2914

Special components of Golf "GTI 337 Edition"/Jetta GLI Sport and Golf R32
Roof edge spoiler, removing
Warning!
When disassembling special components, a cutting
cable must not be used because of danger of
damaging painted surfaces.
- Clean dirt from all seams so that no damage to paint will
occur when removing components.
- Cover all adjacent paint surfaces and gap between roof
and rear lid with tape.
- Spooling tool must be applied in depicted position and
one cord end must be secured.
- Insert cutting cord around spoiler so that cord passes
along outside in seam between spoiler and rear lid and
secure second cord end to wiper axle.
- While cutting free, guide cutting cord into seam using a
plastic wedge.
- In position illustrated, spoiler can be cut free to slightly
past vehicle center.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Página 19 de 23
13/2/2005