Chapter 4 Commissioning; Unpacking / Set Up - Uniflex HM 200 Operating Manual

Chapter 4
Note:
The machine may only be commissioned and operated by trained and authorised personnel!
Note:
For optimal operation of the machine the surrounding temperature has to be between 10°C and
35°C.

Unpacking / set up

The UNIFLEX machine was tested prior to delivery and is delivered ready for operation.
How to prevent damage when unpacking:

Carefully remove all packaging.

Check the delivery for completeness using the delivery note.

Remove the four screws in the corners of the fastening.

Use a fork lift truck to lift the hose crimping machine off the palette.
Note:
Pay attention to the correct balance!
Set the hose crimping machine on a stable and level work bench.
Note:
The hose crimper needs to be placed so that it is accessible from all sides for maintenance works.
The work bench needs to be able to support the weight.

Fasten the machine feet to the work bench.
HM 200 Ecoline
Rear view Connections
P P
T
P Pump Connection
T Connection to oil tank
UNIFLEX-Hydraulik - 12 - www.uniflex.de
Commissioning