Qualified Personnel - Siemens 7XV5652-0xA00 Series Operating Instructions Manual

1.1

Qualified Personnel

Tampering with the device/system or noncompliance with the safety
notices given in this manual may cause severe bodily injury or property
damage. Therefore any interventions on the device/system may only be
performed by adequately qualified personnel.
Qualified personnel as per the safety notices given in these instructions
or on the product itself is:
• personnel involved in planning and configuration activities and familiar
with the safety concepts used in automation engineering;
• operating personnel trained for working with automation systems and
familiar with the content of this manual as far as it deals with operational
aspects;
• commissioning and service personnel having adequate training and
qualification to repair this type of automation equipment and/or having
authorization to commission, release, ground and tag devices, systems
and electrical circuits.
12.10.2006 RS232-FO Converter Page 5 of 28