General Instructions - Siemens 7XV5652-0xA00 Series Operating Instructions Manual

1

General Instructions

This manual includes the information required for the normal use of the
products described therein. It is intended for technically qualified
personnel which has been specially trained or has special knowledge in
the fields of protection-, instrumentation-, control-, and automatic control
engineering (called automation in the following).
The knowledge and the technically correct translation of the safety
instructions and warnings included in this manual are a prerequisite for
the safe installation and commissioning, as well as for safety during
operation and maintenance, of the product described. Only qualified
personnel, as defined in the following explanation, possess the technical
knowledge required to interpret correctly and to put into action for each
individual case the safety instructions and warnings given in this
document in a general manner.
This manual is an integral part of the scope of delivery. However, it
cannot take into account every detail on all types of the described
product and also every possible case regarding installation, operation or
maintenance. If further information is desired or in case special problems
should arise, which are not treated adequately in this document, it is
possible to obtain additional details from the local Siemens office or from
the addresses stated in the back of this manual.
Additionally, we point out that the content of this product documentation
is not part of or modifies any previous or existing agreement, promise, or
legal relationship.
All obligations by Siemens result from the respective purchase order
which also includes the complete and exclusively valid warranty
provision. The contractual warranty regulations are neither extended nor
limited by the statements in this document.
Page 4 of 28 RS232-FO Converter 12.10.2006