SSANGYONG RODIUS 2007.07 Manual page 265

8. SYSTEM OPERATION
1) Transfer Case Control Unit (Tccu)
(1) 4WD Operation
▶
2H → 4H
- Change the 4WD switch in instrument panel from 2H to 4H.
- This shift is available during driving.
- "4WD HIGH" indicator in meter cluster comes on.
When the system is defective
-
"4WD CHECK" warning lamp comes
on
▶
4H → 2H
- Change the 4WD switch in instrument panel from 4H to 2H.
- This shift is available during driving.
- "4WD HIGH" indicator in meter cluster goes out.
- "4WD CHECK" warning lamp comes on when the system is defective.
TCCU is located under the front left seat and
permits the vehicle to shift from two-wheel
drive to four-wheel drive (and back shift)
according to drivers switch operation during
driving (For the shifting between 4WD HIGH
and 4WD LOW, stop the vehicle).
0-17
3410-01
TRANSFER CASE
RODIUS 2007.07