Playing Tracks Repeatedly; Repeat Play; Playing A Tape In Various Modes - Sony XR-C7200R Operating Instructions Manual

Locating the beginning of a track
— Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, press either side of
(SEEK/AMS) momentarily.
SEEK/AMS
To locate
succeeding tracks
To locate preceding
tracks
Note
The AMS function may not work when:
• the blanks between tracks are shorter than four seconds.
• there is noise between tracks.
• there are long sections of low volume or quiet sections.
Changing the displayed item
Each time you press (DSPL), the item changes
as follows:
z Tape playback
* While the AF/TA function is activated.
EN

Playing tracks repeatedly

— Repeat play

You can repeat play the current track.
1
During playback press (SHIFT).
Each time you press (SHIFT), only the items
you can select light up.
1
SHIFT
2
Press (6) (REP).
Repeat play starts.
To go back to the normal playback mode, press
(6) again.
3
Press (SHIFT).
6
z Clock z Frequency*
PLAY MODE REP
2 3 4 5
Playing a tape in various
modes
You can play the tape in various modes:
•Intro (Intro Scan) lets you play the first 10
seconds of all the tracks.
•NR (Dolby NR) lets you select the Dolby* NR
B system.
•ATA (Automatic Tuner Activation) turns on
the tuner automatically while fast-winding
the tape.
•B.Skip (Blank Skip) skips blanks longer than
eight seconds.
∗ Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol a are
trademarks of Dolby Laboratories Licensing
Corporation.
1
Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until the desired play
mode appears.
Each time you press (3), the item changes
as follows:
Intro n NR n ATA n B.Skip
F W D
SUR EQ
2
Press (4) (n) to select the desired play
mode setting (for example: on, NR B).
F W D
SUR EQ
6
Playback starts.
3
Press (SHIFT).
To go back to the normal playback mode,
select "off" in step 2 above.
Intro off
PLAY MODE
Intro on
PLAY MODE