Labelling A Cd; Disc Memo - Sony CDX-C6800X Operating Instructions Manual

Labelling a CD

(For a CD unit with the custom file function)
You can label each disc with a personalised
name. You can enter up to 8 characters for a
disc. If you label a CD, you can locate the disc
by name (page 13) and select the specific tracks
for playback (page 14).
1
Start playing the disc you want to label.
2
Press (MENU), then press either side of
(DISC/PRST) repeatedly until "NAME
EDIT" appears.
3
Press (ENTER).
Name edit mode
4
Enter the characters.
1 Press the (+) side of (DISC/PRST)
repeatedly to select the desired
characters.
(A t B t C t ··· Z t 0 t 1 t 2 t
··· 9 t + t – t * t / t \ t > t <
t . t _ )
If you press the (–) side of (DISC/PRST)
repeatedly, the characters will appear in
reverse order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press the (+) side of (SEEK/AMS) after
locating the desired character.
The next character flashes.
If you press the (–) side of (SEEK/AMS),
the previous character flashes.
3 Repeat steps 1 and 2 to enter the
entire name.
12

— Disc Memo

5
To return to normal CD play mode, press
(ENTER).
Tips
• To erase or correct a name, enter "_" (under-bar)
for each character.
• There is another way to start labelling a CD. Press
(LIST) for two seconds instead of steps 2 and 3.
You can also complete the operation by pressing
(LIST) for two seconds instead of step 5.
• You can label CDs in a unit without the custom
file function, if it is connected along with a CD
unit which has the function.
Displaying the disc memo
Press (DSPL) during CD or CD TEXT disc
playback.
Each time you press (DSPL) during CD or
CD TEXT disc playback, the item changes
as follows:
Disc number*
Elapsed playback time
Disc memo name
Track name*
1
While an optional CD unit is connected.
*
2 If you connect an optional CD unit with the
*
CD TEXT function, the CD TEXT information
will appear in the display when you play a
CD TEXT disc.
V
1 /Track number/
V
V
2