MG MG3 Owner's Handbook Manual page 223

Engine Compartment Fuse Box
Check or Replace a Fuse
1 Switch off the ignition switch and all electrical
equipment, disconnect the battery negative cable.
2 Press the catch to open the fuse box cover.
3 Check if any fuse is blown.
4 If the fuse is blown, replace it with another fuse of the
same ampere value.
EMERGENCY INFORMATION
Fuse Specification
Code Specs
F1 10A Right front dipped beam
Downstream oxygen sensor, Intake
F2 5A camshaft solenoid valve, Exhaust
camshaft solenoid valve
F3 10A Left front dipped beam
F4 10A A/C compressor clutch relay
F5 5A Engine control module
A/C compressor clutch relay,
Canister control valve, A/C medium
pressure switch, Cooling fan relay
F6 5A
box, Fuel pump relay, Starter relay,
Clutch position switch, Start stop
switch
Front wiper enable relay, front
F7 30A
wiper speed relay
F8 5A Upstream oxygen sensor
Function
209
5