Mitsubishi MELSEC-Q Series Programming Manual page 651

(2) In the following program, the zone control applying negative and positive bias values of
10000 to 10000 is performed on the data set for Var_D0 when X1 turns ON, and the result
is stored to Var_D10.
[Structured ladder]
[ST]
DZONEP(X1,−10000,10000,Var_D0,Var_D10);
[Operation]
• The value Var_D1 + ( 10000) is stored to Var_D10 if Var_D0
Example
Var_D0
• The value 0 is stored to Var_D10 if Var_D0
• The value Var_D0 + 10000 is stored to Var_D10 if 0
Example
Var_D0 50000 Var_D10 60000
12345 Var_D10 22345
0.
7.13 Data Control Instructions
7.13.3 Zone control of 16-/32-bit BIN data
ZONE, DZONE
0.
Var_D0.
7
7-311