Fermax DUOX iLOFT User Quick Manual
Hide thumbs
Also See for DUOX iLOFT:
- Installation and programming manual (24 pages) ,
- User & installation manual (53 pages) ,
- Technical book (108 pages)
Advertisement
USER'S QUICK GUIDE: DUOX iLOFT TELEPHONE
CONTROL BUTTONS / LEDS
LEDs
Micro
Audio Activation, Hang-Up and Auto Switch-On Buttons:
· Audio activation: When you receive a call press this button to speak with the visitor. The audio
channel is opened and operation is in hands-free mode (by default).
· Hung up: Press to end the conversation, or the conversation will end after 90 seconds.
· Auto switch-on (only with video panel): In standby mode, press and release this button, (the
blue LED will light up). This feature is possible with the outdoor panel "0" of the same block, if
there is not other conversation in progress.
Notas:
- When receiving a call, there is a 30-second interval in which to answer. The red LED light shuts
down during this time, indicating a pending call.
- If a call is received from another panel, when the conversation has been completed, for 15 seconds,
auto switch-on will happen with that panel.
LEDs
Operation
Not
LEDs
programmed
Red
Blue
Green Led: Depending on confi guration, (check with your installer).
USER SETTINGS:
Simplex (Push to Talk) conversation mode
Ringtone Selection (MELODIES)
USER'S QUICK GUIDE: DUOX ILOFT TELEPHONE
Ring tone volume setting.
· On standby: At the MINIMUM, call disconnection (Do Not Disturb Mode).
· Conversation in progress: Upstream audio setting.
Lock release button / Call to the concierge:
· While in conversation: Pushing this button will activate the lock release.
· On receiving the call (non-active audio): There are 30 seconds in which
to complete the release process.
· In standby mode: Pressing this button will make a call to the concierge
(if exits).
Auxiliary function (check with your installer).
Standby
Call
H a n d s f r e e
Called
Output Audio
simplex mode
audio
Input Audio
Do not
simplex mode
Disturb Mode
Switched on
Slow blinking
Fast blinking
Cod. 970144I V12_18
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fermax DUOX iLOFT
Summary of Contents for Fermax DUOX iLOFT
- Page 1 USER’S QUICK GUIDE: DUOX iLOFT TELEPHONE CONTROL BUTTONS / LEDS Ring tone volume setting. · On standby: At the MINIMUM, call disconnection (Do Not Disturb Mode). · Conversation in progress: Upstream audio setting. Lock release button / Call to the concierge: ·...
- Page 2 , button you will hear a double beep and exit the menu to return to standby mode. Note: You can also exit the reception ringtone menu from the panel, after inactivity for 10 seconds (storing the last ringtone played). USER’S QUICK GUIDE: DUOX ILOFT TELEPHONE...
Need help?
Do you have a question about the DUOX iLOFT and is the answer not in the manual?
Questions and answers
What does Do Not Disturb actually mean? I just moved into a new apartment and the light blinking on the intercom means it’s on Do Not Disturb. Does that mean I won’t be notified if someone rings the bell downstairs? If so, how to I remove the Do Not Disturb?
On the Fermax DUOX iLOFT intercom, "Do Not Disturb" mode prevents interruptions by disabling audio notifications for incoming calls. To remove this mode, it must be deactivated through the settings or controls. Check with your installer for specific configuration details.
This answer is automatically generated