Adjusting Headlight Alignment; Removing The Taillight Unit - Ferrari 458 Italia Technical Documentation Manual

Hide thumbs Also See for 458 Italia:
Table of Contents

Advertisement

Lights

Adjusting headlight alignment

Remove the luggage compartment cosmetic shields (
Park the vehicle, unloaded and with the tyres inflated to the specified pressure, on a flat, level surface in front
of a shaded white screen.
Refit the luggage compartment cosmetic shields (

Removing the taillight unit

The following procedure is for removing the left hand taillight unit.
The procedure for removing the rear right hand light cluster is identical.
Disconnect the battery (
Remove the rear wheelhouses (
Remove the rear element of the rear wheelhouse.
E4.07).
F2.01).
E3.05).
E4.07).
Draw two crosses on the screen corresponding to
the centres of the low beam headlights.
Move the vehicle 10 metres backwards and switch
on the low beam headlights: The reference
points P1 of the light beam must be lower than
the respective crosses by 1/10 of the distance
between the ground and the crosses themselves.
The values given here are with reference to
applicable legislation in Italy. For other
countries, comply with the local legislation.
If necessary, adjust the headlight beams with the
relative adjuster screws.
Page 4 of 7

Advertisement

Table of Contents
loading

Table of Contents