Table of Contents
Advertisement
Pneumatic actuator system solenoid valves
Refit the rear bumper (
Reconnect the battery (
Replacing secondary air system valve control solenoid valve
The secondary air system valve control solenoid valve is fitted in the rear side of the engine oil tank.
Disconnect the battery (
E3.04).
F2.01).
F2.01).
Detach the pipes (1) removing the indicated clamps.
Detach the pipes (2) removing the indicated clamps.
Remove the solenoid valves (A) and replace them.
Connect and fasten the pipes (2) to the new
solenoid valves (A) with new indicated clamps.
Connect and fasten the pipes (1) with new indicated
clamps.
Fit the retainer brackets in the relevant seats.
Tighten the screws indicated fastening the solenoid
valves (A).
Tightening torque
Screw
Connect the connectors (3).
Page 2 of 3
Nm
Class
4 Nm
B
Advertisement
Table of Contents
