Table of Contents
Advertisement
Lamps
Reconnect the battery (
Replacing the number plate light bulb
Disconnect the battery (
F2.01).
F2.01).
Refit the complete side repeater turn indicator (A)
onto the vehicle, press fitting by hand into the
relative hole in the front fender until flush.
Prise the number plate light unit (A) out of its seat
on the bumper, applying leverage on the right-
hand side of the light, as shown in the photo
aside.
The fastener clips are on the right-hand side of the
number plate light unit.
Page 6 of 9
Advertisement
Table of Contents
