Storing Station Names; Station Memo - Sony WX-4500X Operating Instructions Manual

Storing station names

— Station Memo

You can assign a name to each radio station and
store it in memory. The name of the station
currently tuned in appears in the display. You can
assign a name using up to 8 characters for a
station.
Storing the station names
1
Tune in a station whose name you
want to store.
2
Press (MENU), then rotate the jog
roller until "Name Edit" appears.
3
Push the jog roller.
4
Enter the characters.
1 Rotate the jog roller to select the
desired character.
A t B t C ... t 0 t 1 t 2 ... t +
t – t *
* (blank space)
2 Press (SEEK/AMS +) after locating
the desired character.
If you press (SEEK/AMS -), you can move
back to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
5
Push the jog roller.
Tips
• Simply overwrite or enter "
name.
• There is another way to start storing station names:
Push the jog roller for 2 seconds instead of
performing steps 2 and 3.
16
... t * t A
" to correct or erase a
Displaying the station name
Switch the display item to frequency or station
name*.
To Press
(DSPL) during radio
Switch display
item reception
* If the station name is not stored, "NO Name"
appears in the display for one second.
Erasing the station name
1
During radio reception, press (MENU),
then rotate the jog roller until "Name
Delete" appears.
2
Push the jog roller.
3
Rotate the jog roller to select the
station whose name you want to
erase.
4
Push the jog roller for 2 seconds.
The name is erased.
Repeat steps 3 to 4 if you want to erase other
names.
5
Press (MENU) twice.
The unit returns to normal radio reception
mode.
Note
If you have already erased all of the station names,
"NO Data" appears in step 4.