Labeling A Cd; Disc Memo - Sony WX-4500X Operating Instructions Manual

Note
"Shuffle all" will not shuffle tracks between CD units
and MD units.

Labeling a CD

— Disc Memo (For a CD unit with the
CUSTOM FILE function)
You can label each disc with a custom name
(Disc Memo). You can enter up to 8 characters
for a disc. If you label a CD, you can locate the
disc by name (page 12).
Caution
Do not use the CUSTOM FILE feature while
driving, or perform any other function which
could divert your attention from the road.
1
Start playing the disc you want to
label.
2
Press (MENU), then rotate the jog
roller until "Name Edit" appears.
3
Push the jog roller.
The unit will repeat the disc during the
labeling procedure.
4
Enter the characters.
1 Rotate the jog roller to select the
desired character.
A B C
t t ... t
– *
t t ... t
* (blank space)
2 Press (SEEK/AMS +) after locating
the desired character.
If you press (SEEK/AMS -), you can move
back to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
5
To return to normal CD play mode,
push the jog roller.
0 1 2
t t ... t +
A
* t
Tips
• Simply overwrite or enter "
name.
• There is another way to start labeling a CD: Push
the jog roller for 2 seconds instead of performing
steps 2 and 3.
• You can label CDs on a unit without the CUSTOM
FILE function if that unit is connected along with a
CD unit that has the function. The Disc Memo will be
stored in the memory of the CD unit with the
CUSTOM FILE function.
Note
Repeat/shuffle play is suspended until the Name Edit
is complete.
Viewing the Disc Memo
As a display item, the Disc Memo always takes
priority over any original CD TEXT information.
To Press
(DSPL) during CD/CD
View
TEXT disc playback
Tip
To find out about other items that can be displayed,
see page 10.
Erasing the Disc Memo
1
Press (SOURCE) repeatedly to select
"CD."
2
Press (MODE) repeatedly to select the
CD unit storing the Disc Memo.
3
Press (MENU), then rotate the jog
roller until "Name Delete" appears.
4
Push the jog roller.
The stored names will appear.
5
Rotate the jog roller to select the disc
name you want to erase.
The stored names will appear.
6
Push the jog roller for 2 seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (MENU) twice.
The unit returns to normal CD play mode.
Notes
• When the Disc Memo for a CD TEXT disc is erased,
the original CD TEXT information is displayed.
• If you cannot find the Disc Memo you want to erase,
try selecting a different CD unit in step 2.
" to correct or erase a
11