Connection Diagram - Sony MV-900SDS Operating Instructions (primary manual) Operating Instructions Manual

Connection diagram

Refer to the connection diagram for the proper connections.
Note
Set the POWER SELECT switch before installing (page 6).
From the car antenna
Speaker system
(optional)
1 An adapter (optional) may be necessary for your
*
car and car audio system. In such a case, consult
your dealer.
2 If your car has no ACC (accessory) position on
*
the ignition key switch, set the POWER SELECT
switch to B (page 6) and connect this ACC cable
to the +12 V power (battery) terminal.
Monitor (optional)
36
Amplifier equipped
with a digital input
(optional)
Antenna connector* 1
Car audio
(optional)
Monitor cable (optional)
Relay box
0.5 m
RCA pin cord (optional)
Optical cable
(optional)
5 m
AUDIO/VIDEO OUTPUT
Connection box
(optional)