Programming Interfaces - Safeline SL2 Manual

Programming
interfaces
Unit have to be connected to
power source before
programming begins!
Installation
Keyboard programming
The integrated keyboard on the SafeLine board enables a fast
programming of the unit.
Programming with SafeLine Pro.
The unit can be programmed at the office prior to the installation
or on site after installation, with a programming cable. Our product
"PCable" Use SafeLine Pro v4.02 or later.
SafeLinePro
Remote programming.
For remote programming, you can use any PSTN tone dial phone. Dial
the phone number of the SafeLine. Enter the function codes on the
phone keypad to start programming (password has to be entered).
1 2 3
4 5 6
7 8 9
0 #
*
Remote programming with SafeLine Pro.
Connect an SLPro Link to a computer with SafeLine Pro and a serial
cable. Use SafeLine Pro v4.02 or later.
SafeLinePro
SafeLinePro
8
SafeLine
ProLink
SL2
SL2
SafeLine
SL2
SL6
SL2 v. 2.01 EN