Dometic 10 Series Operating Manual page 40

Troubleshooting
Code LEDs
E07
E08
E09
W10 Beep
W11
E12
E13
40
Fault
No cooling capacity in
gas mode
No cooling power in AC
operation
No cooling power in DC
mode
Door is open for more
than 2 minutes; a signal
tone is emitted.
DC overvoltage (> 16 V).
Gas valve check error
Internal communication
error
Type Solution
Error Check if the unit is at an
angle and adjust it if
necessary.
Reset the error manually.
Contact customer service if
this error occurs again.
Error Check if the unit is at an
angle and adjust it if
necessary.
Reset the error manually.
Contact customer service if
this error occurs again.
Error Check if the unit is at an
angle and adjust it if
necessary.
Reset the error manually.
Contact customer service if
this error occurs again.
Warning Close the door.
Warning Reduce DC supply voltage.
Error Gas operation is not
possible.
Reset the error manually.
Contact customer service if
this error occurs again.
Error Gas operation not
possible.
Reset the refrigerator.
Reset the error manually.
Contact customer service if
this error occurs again.
RMD10
EN