Mitsubishi Electric S Series Manual page 74

CEILING-CONCEALED
8
[Fig. 8-16]
[Fig. 8-17]
[Fig. 8-18]
[Fig. 8-19]
[Fig.8-20]
Be sure to fix the
indoor/outdoor unit
connecting wire using
this cord clamp.
B-74
8.3
Screw (M4 x 30)
* When installing the lower case directly on the wall or the ceiling,
use wood screws.
Hang the cover to the upper hooks (2 places).
Mount the cover to the lower case
Cross-section of upper hooks
8.4
[Fig. 8-21]
Service panel
Remove one fixing
screw to open the
service panel.
Insert the minus screwdriver toward the
arrow pointed and wrench it to remove the
cover.
A flat screwdriver whose width of blade is
between 4 and 7 mm (5/32 - 9/32 inch)
must be used.
Thin-wall portion
Bottom case
Remote controller wire
Conducting wire
Loosen terminal screw
Terminal block
Lead wire
S series