Table of Contents
Advertisement
Place a screwdriver into recesses
#
then pry off covers 1.
Using the lug wrench from the vehicle tool kit,
#
unscrew the now visible bolts counter-clock‐
wise by approximately 20 turns.
Slightly raise spare wheel carrier
#
unhook left-hand safety hook 3.
Assemble the pump lever for the jack and
#
slide it into sleeve
5
of spare wheel carrier 4.
Raise spare wheel carrier
#
lever and unhook right-hand safety hook 3.
Slowly lower spare wheel carrier
#
ground.
Lift spare wheel carrier
#
the pump lever out of the sleeve.
Use the pump lever to lift the spare wheel
#
beyond the rear edge of spare wheel carrier
4.
Carefully remove the spare wheel from spare
#
wheel carrier 4. The spare wheel is heavy.
When the spare wheel is removed, the center
of gravity changes due to the heavy weight of
the wheel. The spare wheel may slip down or
tip over.
Vehicles with rear wheel drive: installing the
spare wheel (Cargo Van/Passenger Van)
Carefully place the spare wheel onto spare
#
wheel carrier 4. The spare wheel is heavy.
When you place the spare wheel onto spare
wheel carrier 4, the center of gravity
changes due to the weight of the wheel. The
spare wheel may slip down or tip over.
Slide the pump lever for the jack into sleeve
#
5
on spare wheel carrier 4.
Raise spare wheel carrier
#
lever and attach right-hand safety hook 3.
Slightly raise spare wheel carrier
#
attach left-hand safety hook 3.
Pull the pump lever out of sleeve 5.
#
Using the lug wrench, tighten safety hook
#
bolts
3
by turning them clockwise.
Replace and engage covers 1.
#
Close the rear-end doors.
#
2
and
4
and
on the right-hand side
4
with the pump
4
to the
4
slightly and pull
4
with the pump
4
and
Vehicles with rear wheel drive: removing the
spare wheel (vehicle with lowered chassis)
Bolt covers for the safety hooks (example: Cargo
Van)
Open the rear-end doors.
#
Wheels and tires 319
Advertisement
Table of Contents
