Calling Up Settings On The On-Board Computer; Accepting/Rejecting A Call - Mercedes-Benz Sprinter 2019 Operating Instructions Manual

Only operate this equipment when the
#
traffic situation permits.
If you cannot be sure of this, stop the
#
vehicle whilst paying attention to road
and traffic conditions and operate the
equipment with the vehicle stationary.
When using the phone, you must observe the
legal requirements for the country in which you
are currently driving.
Requirements:
The mobile phone is connected to the multi‐
R
media system.
On-board computer:
Phone
4
Select one of the following options:
Previous calls
R
Phone book
R
Call status
R
Vehicles with MBUX multimedia system: the
most recent telephone calls (dialed numbers,
accepted and missed calls) are displayed on the
Phone menu.
Select and confirm a telephone number.
#
If only one telephone number has been
saved for the entry: the telephone number
is dialed.
If several telephone numbers have been
#
saved for the entry: select and confirm a
telephone number.
The telephone number is dialed.
Instead of the selected telephone numbers, the
following displays may appear:
Please Wait: The application is currently start‐
R
ing. If no Bluetooth
phone is established, the menu for authoriz‐
ing and connecting a mobile phone will be
displayed in the multimedia system
( page 231).
/
Updating Data...: The call list is being upda‐
R
ted.
Importing Contacts: The mobile phone's con‐
R
tacts, or a memory medium's contacts are
being imported.

Accepting/rejecting a call

When you are called, the
appears on the display.
®
connection to the mobile
Incoming Call message
Instrument Display and on-board computer 173
Press 6 to accept the call or ~ to
#
reject it.
You can also accept or reject the call using the
6 or ~ buttons on the steering wheel.

Calling up settings on the on-board computer

On-board computer:
Settings
4
The following entries can be set on the Settings
menu:
Light
R
Setting Instrument lighting
-
Vehicle
R
Switching Regensensor
-
and off
Setting Heating
R
Display and Operation
R
Switching permanent
-
on and off
Select an entry and confirm the selection.
#
Make the necessary changes.
#
(Rain sensor) on
Display DEV Level