Resetting The Multizentrale; Pro; Updating The Multizentrale; And Multimaus - roco multiMAUSPRO Getting Started

The separate connection of the programming track is especially practical and easy to use. This track is easily
integrated into your system and used for normal train operation. Move any locomotive to be programmed onto
this track. As soon as the multiMAUS
matically so that reading out and programming can be carried out without interfering with the other vehicles or
magnetic units on the system.
The programming track must be completely electrically isolated from the remaining system with insulating
track connectors.
Please consult Fig. 3 on page 90 for a visual depiction of the basic connection of main and programming track.
4.4

Resetting the multiZENTRALE

If the digital system no longer functions as expected – i.e. train running problems, readout and/or programming
problems – it may be necessary to reset the multiZENTRALE
malfunction causes before resetting the entire system. Please read Chapter 5.8 "Tips, Notes, and Shortcuts."
How to reset the unit:
– Unplug the power supply from the multiZENTRALE
– Press the white key and insert the plug to the power supply. Keep the key depressed until all 4 LEDS flash
simultaneously.
The multiZENTRALE has now been reset to the factory settings. If the digital system still is not working properly,

PRO

please consult your specialized dealer or retailer.
Resetting the multiZENTRALE
re–entered.
4.5

Updating the multiZENTRALE

The integrated USB port makes a software update of multiMAUS
Simply connect the multiZENTRALE
and start the update program available from the ROCO Internet site. Follow the instructions of the user menu.
Note:
• During the update process of the multiZENTRALE
wireless connection symbol is depicted in the display. The wireless connection is automatically re–estab-
lished once the update is finished.
• During the update of the multiMAUS
• The voltage supply of the system is switched off during the update.
is set to menu mode, the multiZENTRALE
PRO
PRO
PRO
deletes all input and saved routes and double headings. These must be
PRO

and multiMAUS

PRO
to the USB port (USB 1.1) of a PC (Windows 98 SP 2 or higher). Download
PRO
PRO
, "UPDATE" is displayed.
PRO
. However, you should check all other possible
PRO
.
PRO
and multiZENTRALE
PRO
the unit is not linked with the multiMAUS
switches this track auto-
PRO
PRO a breeze.
even if the
PRO
��
81