The Menu Functions Of The Multimaus; Pro - roco multiMAUSPRO Getting Started

Part 3 • Menus

The Menu Functions of the multiMAUS

��
The multiMAUS

PRO

change the basic settings of the multiMAUS
tions:
– Press the "MENU" key alone for approximately 5 seconds (the duration can be set in the "SETTINGS" menu),
practical when using the multiMAUS
– Press the Shift and "MENU" keys simultaneously.
Either way the last used menu is opened. This is the "LOCO" menu when using the multiMAUS
first time. A scrolling text program integrated into the multiMAUS
5 letters as scrolling text.
The display images in this manual depict the menu as an abbreviation with the complete name being shown
directly below the image.
Start location:
Normal Operation
LOCO
You use one of the "arrow keys" to continue in the menu level. You use the "Light /OK" key to call up the respective
submenu. The menus are all numbered. The numbers are shown at the bottom of the display.
Each of the four large main menus has its own pictograms for clear identification. They appear in addition to the
word "MENU". You will also find them in the respective submenus:
– Menu 1 "LOCO": Symbol „
– Menu 2 "PROGRAM": Lettering „Prog",
– Menu 3 "SETTINGS": Symbol „
– Menu 4 "ROUTES": Symbol
66
has four main menus with which you can both perform comprehensive programming and
PRO
with one hand.
PRO
or
Hold for appr. 5 seconds
PROGRAM
",
".
.
PRO
. This menu level can be accessed using two simple key combina-
displays all the menu names with more than
PRO
or
SETTINGS
is used for the
PRO
or
ROUTES