9
Guide the burner cable through the
aperture in the control unit bracket
(l.h. or r.h. subject to boiler door opening).
Clip a cover cap into the control unit
bracket to protect the burner cable.
Secure the cable clip with the burner cable
at the l.h. or r.h. side (bottom) of the boiler.
Position the casing cover
10
onto both side casings and push towards
the control unit bracket.
12
Push the front casing
with open control unit lid with the
profile screws against the spring
, until they click into place.
shackles
11
Affix the type plate
13
in a clearly visible position.
14
Clip the Wolf logo
into the front casing
(only for FunctionLine).
Cover cap
Cable clip
Burner cable holder
Front casing installation
Type plate
Type plate / Wolf logo
Boiler assembly
Wolf logo
1 5