Networking The Field Pg With Other Stations On Profibus; Ethernet (Rj45 Ethernet Interface) - Siemens Simatic Field PG Manual

Configuring And Operating The SIMATIC Field PG
3.13 Networking the Field PG with Other Stations on
PROFIBUS
Networking the SIMATIC Field PG on PROFIBUS
PROFIBUS is an open and robust bus system for industrial use. It can be used to
configure networks with up to 32 stations per segment. PROFIBUS-DP supports
data-transfer rates from 9.6 Kbaud to 12 Mbaud.
How the Network Functions
The network operates on the "Master-Slave Principle with Token Passing"
(complying with DIN19245, PROFIBUS). It distinguishes between active and
passive stations. An active station receives the token and passes it on to the next
station within a specified time.
Hardware Requirements
Using the following components, for example, you can connect or network the
SIMATIC Field PG with PROFIBUS:
RS 485 MPI/DP interface adapter, integrated
Shielded, twisted pair (bus cable or connecting cable to network).
3.14

Ethernet (RJ45 Ethernet Interface)

Networking Field PG via RJ45 Ethernet Interface
The RJ45 Ethernet interface is a Twisted-Pair (TP) Interface for data transfer rates
of 10/100 Mbaud. This on-board interface is compatible with Intel pro/100+ PCI
Adapters.
The Plug & Play interface is automatically recognized in Windows. Protocols are
configured in the Windows system control.
Notice
A Class 5 Ethernet cable is required for operation with 100 Mbaud.
3-22
SIMATIC Field PG Manual
A5E00075760-04