The Power Menu - Siemens Simatic Field PG Manual

5.5

The Power Menu

This menu has the following structure:
Fig. 5-12
The Power menu offers a number of power-saver modes for environmentally
friendly computing:
Power Savings
Major components are shut down in suspend mode. The information needed for
reactivating the programming device is buffered.
Hard Disk Timeout
Resume On Time
SIMATIC Field PG Manual
A5E00075760-04
PhoenixBIOS Setup Utility
Main Advanced Security
[Enabled]
Power Savings:
Hard Disk Timeout: [Disabled]
Resume On Time [Off]
Resume Time: [00.00.00]
Resume On Modem Ring: [Off]
After Power Failure: [Stay Off]
Help Select Item
F1
ESC Exit Select Menu
"Power" Menu
[Disabled] No power-saving functions
[Customize, Maximum Power Savings, Maximum Performance]
User-selectable and preset power-saving functions
for maximum and minimum power saving.
You can set the parameters for Standby/Suspend
Timeouts and Fixed Disk Timeout or they set
automatically to their defaults.
[Disabled]
[10, 15, 30, 45]
[1, 2, 4, 6, 8, 10, 15] Minutes after the last hard disk access
[On]
[Off]
Configuring the SIMATIC Field PG
Power Boot Version
Item Specific Help
[Enabled] [Disabled]
Switch on/off Power
Savings to conserves
system power.
To turn off power
management, choose
Disabled, but remember
Power Button also did
not functioning.
+ / – Change Values F9
Enter Select Sub-Menu F10
The hard disk does not shut down.
Seconds or
The next time it is accessed, the hard disk
starts spinning again after a brief delay.
If this function is enabled the
programming device is automatically
switched on at the preset time.
'Off' means this function is disabled.
Exit
Setup Defaults
Save and Exit
5-17