Stairville CLB5 2P RGBWWCompact LED Bar User Manual page 38

Operating
Operating mode 'Preprog‐
rammed automatic show'
Value Colour
Co.00 Blackout
Co.04 White
Co.08 Magenta
Co.12 Light green
38
A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press [Mode] repeatedly until the display shows 'Pro' . Press [Setup]. Now you can select one of
the preprogrammed automatic shows. Use [Up] | [Down] to select a value between 'Pr.01' and
'Pr.30' .
Settings for programme 01:
For 'Pr.01' , you can choose from 15 basic colours or blackout of all LEDs. Press [Setup]. Use [Up]
| [Down] to select a value between 'Co.00' and 'Co.15' or 'OFF' (blackout).
The following table shows the assignment of the values.
Value Colour
Co.01 Red
Co.05 Amber
Co.09 Pink
Co.13 Light blue
LED lighting set
Value Colour
Co.02 Green
Co.06 Orange
Co.10 Cyan
Co.14 Warm white
Value Colour
Co.03 Blue
Co.07 Yellow
Co.11 Light red
Co.15 Cold white