Table of Contents
Advertisement
1. DO NOT process hazardous substances.
Never process explosive substances, flammable substances or substances that contain
explosives or flammables with BE units. See "List of Hazardous Substances" on P.24.
2. DO NOT operate equipment when abnormalities are detected.
If unit begins emitting smoke or abnormal odors for reasons unknown, turn off main power
(ELB) immediately, disconnect power cable from power supply, and contact a local dealer or
Yamato sales office for assistance. Continued use without addressing abnormalities may
cause fire or electric shock, resulting in serious injury or death. Never attempt to disassemble
or repair unit. Repairs should always be performed by a certified technician.
1. DO NOT climb on equipment.
Do not attempt to climb onto unit or substitute it for a proper step ladder. Units are not
designed to support bodily weight and damage may result. In addition, unit may become
unstable and tip over or fall resulting in equipment damage, serious injury or death.
2. DO NOT place objects on equipment.
Do not place any objects on unit. Doing so may cause unit to become unstable and tip over,
resulting in possible equipment damage, injury or death.
3. DO NOT operate equipment during thunderstorms.
In the event of a thunderstorm, turn off main power switch (ELB), and disconnect power cable
immediately. A direct lightning strike may cause equipment damage fire or electric shock,
resulting in serious injury or death.
4. DO NOT operate dry.
Do not operate without cooling coil immersed in fluid. Malfunction or equipment damage may
result.
5. Operate equipment as directed.
Operate BE series units only as directed in this text. Utilizing equipment for anything other
than that which it is intended may cause malfunction, damage, serious personal injury or
death. Read instruction manual thoroughly before use. Likewise, using non-Yamato
components to modify, customize or to otherwise attempt to improve unit design is not
recommended and may void warranty.
6. Keep upright.
Never tilt or place unit on its side while moving or transporting. Damage to refrigeration
system may result. If briefly tilting unit to one side or the other is unavoidable during
transport, refrain from turning power on for at least 24 hours after positioning unit upright.
5. HANDLING PRECAUTIONS
16
Warning
Caution
Advertisement
Table of Contents
