Scosche ITCGM01B Installation Manual page 3

KIT
PANEL
SINGLE DIN ISO INSTALLATION
1. Attach 6552 pocket to the back the of main kit panel with the two supplied screws
as shown above (1).
2. Mount the 7147 and 7148 left and right brackets to the sides of the aftermarket stereo using
the screws supplied with the stereo as shown below (2).
3. Connect and mount the stereo in the dash(3A). The main kit panel/pocket assembly mounts
to the dash over the stereo (3B).
7147 LEFT
MOUNTING
BRACKET
POCKET/PANEL
ASSEMBLY
HAZARD WARNING FLASHERS
Press the Hazard button (page 1, #2) to activate flashing signal lamps (flash on and
off). This warns others that you are having trouble. Press again to turn the flashers off.
(Located top center of face panel).
©2017 SCOSCHE INDUSTRIES, INC.
STEREO ASSEMBLY / MOUNTING
2
3B
3
1
3A
2
7148 RIGHT
MOUNTING
BRACKET
ITCGM01B 05/17