System Setup; Using The Osd Menu - Clarion VTM1 Owner's Manual

System setup

Adjusting the picture response
Accessing the menu :
To adjust the picture, use the menu button to
select the features you would like to adjust.
Adjustment selections are as follows.
1. Press and hold the MENU button for
3 seconds on the remote control or [
on the keypad of the player.
FMT Freq

Using the OSD Menu

Press SETUP on the remote control and the OSD menu opens.
General setup page
Speaker setup page
Speaker setup page
Preference page
]
88.1
Menu
TV DISPLAY: modifies the display if it doesn't match the width to height ratio the DVD uses.
You can select from the following:
·NORMAL/PS ·NORMAL/LB ·WIDE
ANGLE MARK: Selects a different angle if the back of the DVD jacket contains a multiple
angles icon. You can select ON or OFF.
OSD LANG: Selects a language for DVD play menu. You can select from following:
·ENGLISH ·FRENCH ·SPANISH·GERMAN·ITALIAN
CAPTIONS: Selects the caption for DVD play. You can select ON or OFF.
SCREEN SAVER: Protects the screen if it paused about 5 minutes. You can select ON or
OFF.
DOWNMIX: Applies to Dolby digital sound. You can select from following:
·LT/RT ·STEREO
DUAL MONO: Selects the different channels of sound. You can select from following:
·STEREO ·L-MONO ·R-MONO ·MIX-MONO
DYNAMIC: Selects the different rating level of dB. Select from:
·Off ·2/8 ·4/8 ·6/8 ·FULL
TV TYPE: Selects the TV system .You can select from following:
·PAL (Europe and Asia) ·NTSC (United States)
Note: Altering this setting will also change the RCA AV Output.
AUDIO: Selects the audio track language. You can select from following:
·ENGLISH·FRENCH·SPANISH·CHINESE ·RUSSIAN·THAI
SUBTITLE: Selects the language of the subtitles displayed on the screen. You can select
from following:
·ENGLISH·FRENCH·SPANISH·CHINESE ·RUSSIAN·THAI ·OFF
DISC MENU: Selects the language of the current disc. You can select from following:
·ENGLISH·FRENCH·SPANISH·CHINESE ·RUSSIAN·THAI
PARENTAL: Restricts the viewing of movies to children of appropriate age levels only. You
can select 1 to 8.
PASSWORD: Uses the number key"0" to "9" to input 4-digit password. The default
password is 3308.
DEFAULT: Resets all settings to the factory defaults.
2. Press the MENU button repeatedly to select
the item you want to change.
3. Press < or > buttons to change the value of
the item selected.
The features are:
Contrast: Adjusts the contrast of the picture
Brightness: Adjusts the brightness of the picture
Color: Adjusts the color of the picture
Tint: Adjusts the tint of the picture (NTSC only)
Wide Screen: Selects display Mode:
Wide (16:9)/ Normal (4:3)
FMT Freq: Selects the FM Transmitter frequency:
Range: 88.1 to 89.9 MHz in 0.2 MHz steps.
Press the < or > buttons to change the frequency
Then exit the menu and tune your FM radio to this
same frequency to enjoy the audio content.
Description

VTM1