System Setup - Clarion NX702E Owner's Manual

6. SYSTEM SETUP

At all mode, long press [ MENU
button to enter main source menu. Touch
[Custom] on the bottom left of the screen,
then select [Settings] on the screen to enter
Setting menu. Touch the icons on the left of
screen to select category: General, Time,
Sound, Display or Setup. To exit Setting
menu, touch [
screen.
General
System language
Touch the button to the right of "System
language" to show language list. Select
desired language, touch [OK] to confirm, or
touch [Cancel] to exit without saving.
Close operation bar
When select [Auto], the operation bar will
close automatically after 10 seconds.
When select [Manual], the operation bar will
not close unless you touch the blank area on
the screen.
Main Menu Icons
When select [Active], main menu show
animation icons.
When select [Simple], main menu show
simple icons.
Illumi Color
Touch [Set] to the right of "Illumi Color" to
show key illumination setting menu.
Edit Color: There are 12 preset colors and
3 custom colors, you can select one color by
touch Color 1~12 or Custom 1~3.
Touch [Adjust] to show edit color menu.
Drag the color bar or inputting the RGB value
to select one color, touch [OK] to confirm.
Initialize: Load original buttons backlight.
Touch [ BACK ] on the bottom left of the
screen to return to main setting menu.
12
NX702E
ALL ]
] on the bottom left of the
Wallpaper
Touch [Set] to the right of "Wallpaper" to
show Wallpaper setting menu.
Touch [ ] or [ ] button to select the scene,
and touch the picture file name on the right
to preview it, then touch [Set] to confirm the
setting.
To import images, touch [Import].
Select a mobile storage device on the
list, then select desired images and touch
[Import]. Touch [Cancel] to exit.
Monitor Angle
Touch 0~+6 buttons on the screen to select a
monitor angle.
Beep
Touch [On] or [Off] to turn on/off the key
beep sound.
Blinking LED
Touch [On] or [Off] to turn on/off the blinking
LED.
At blinking LED [On] mode, when ACC off,
the LED on the top left of the panel will blink.
Amplifier cancel
Touch [On] or [Off] to set the internal
amplifier on or off.
System software
Touch [Version] to show current software
version.
Factory default
Touch [Restore] to load the original factory
settings.
Time
GPS sync
Touch [On] to synchronize time with GPS
and the following setting is disable: "Time".
Time
Touch the button to the right of "Time" to
show time setting menu. Touch [
button to select hour or minute. Touch [Set]
to confirm or [Back] to exit without saving.
] or [ ]